Solving Low Water Pressure In Your Home

Low Water Pressure In Murrieta Homes

Low water pressure is a common issue in sprinkler systems. If the water flow is not restored to normal, the source of low water pressure is likely not the specific faucet but an overall problem. If low water pressure is affecting only your shower head, you should check for an obstruction in the shower head or see if your shower head has a water conservation filter installed.

Sometimes what seems like low water pressure is actually low water volume, where less water is making it through the pipes than had been flowing previously. It is important to know, that this water pressure is not always a water pump or fixture issue. If low water pressure is causing problems in your household, don’t just live with it. If your low water pressure is limited to a specific fixture, you likely have a blocked aerator.

Low Water Pressure

Low water pressure can be a real annoyance—the shower subsides to a trickle, the washing machine takes eons to fill, and the dribble from the faucet can’t even manage to rinse leftover cereal from the breakfast bowl. If the oomph has gone out of your plumbing, you can try several things before calling in a pro.

Whole-House Low Pressure
The first step in fixing the problem is determining its cause. Let’s say that you’ve recently purchased a home with low water pressure. First consult with neighbors to find out whether the issue plagues the entire community. If it does, you can install a water pressure booster, which operates by increasing the pressure of water on its way from the main water line to your kitchenand bathroom fixtures.

In situations where the neighbors have good pressure but you don’t, the culprit may be a water pressure reducing valve. A previous owner may have had a regulator added to limit the force of water diverted from the municipal supply line. Determine whether such a valve exists at your home; if you discover one, ask a plumber to adjust the setting so that it allows a higher flow rate. Read more here.

A frequent cause of low water pressure is a valve that was closed during routine servicing of a water softener or other water conditioning device. Some of the reasons that lead to low water pressure are given below.

What Causes Low Water Pressure in My House?

Low water pressure makes simple daily activities, such as showering or washing your dishes, frustrating and time consuming, but finding the cause can be the most irksome aspect of this common plumbing problem. So what causes a home’s low water pressure? Here are some of the usual suspects, as well as some possible solutions:

1. Debris and mineral buildup in pipes

Debris — such as sand, dirt, and pollutants — can enter your home’s pipes when a water main fractures. Even without a fractured line, your pipes are susceptible to mineral buildup from the deposits that water leaves behind when traveling through your home. Even a small amount of sediment can create a blockage in your home’s plumbing.

2. Corrosion buildup inside piping

Although your steel or galvanized water piping systems are intended to last up to 20 years, the insides of these pipes tend to block the flow of water with natural corrosion over the years. In terms of repairing, there isn’t much that homeowners can do to completely rectify this problem. See more here.

The good news though is that most of the things which do cause low water pressure are not very serious, and these can be quickly resolved with the right tools and techniques.

How to Solve Low Water Pressure Problems

Water pressure may be low for a couple of reasons. If all of your neighbors have low water pressure, there may not be much you can do except to contact your water supplier and complain about the problem. You might even do well to gather a petition from the neighbors and submit it to the utility.

 If your home is the only one with low pressure—or if only parts of your house have low pressure—then there is probably a constriction in your pipes or valves. The most common cause of low water pressure in a home that’s more than 20 years old is older steel pipes that have become clogged with lime deposits that strangle the flow of water. Unfortunately, to solve this problem, you usually need to have a plumber re-pipe your home.

If the problem seems to be at a single faucet or shower head, check for a flow restriction, clogged aerator, dislodged washer, or partially closed supply stop valve. If a faucet has an aerator, check that first; remove it and clean it out, then replace it. Read full article here.

Homeowners Should Understand Low Water Pressure

Homeowners should understand, however, that increasing the water pressure when low water pressure is not the cause can damage a home water system and increase the likelihood of a catastrophic water system failure. Regardless of the cause, low water pressure is not something you just have to put up with. Sometimes what seems like water pressure is actually low water volume, where less water is making it through the pipes than had been flowing previously. While it is true that many causes of water pressure are due to low system pressure, low water flow can also be caused by high pressure.

Although some of these causes for low water pressure are simple and can be fixed with by simply turning the right valve, this is not always the case. If you likely have a leak somewhere in your plumbing and any leak large enough to cause low water pressure is one that needs to be addressed right away just contact us (951) 319-2353.  Most water pressure issues can be fixed with the help of a professional plumber of plumbing service.

Related Articles:

Water Pressure Problems in Murrieta

Slow Water Pressure – Common Problem For Homeowners

The post Solving Low Water Pressure In Your Home appeared first on Murrieta Plumber | Murrieta Plumbing Services Residential Commercial.