A Water Pressure Regulator In Your Home

Water Pressure Regulator Can Protect Against Air Pressure In Murrieta

Water pressure regulator is a plumbing valve that reduces the water pressure coming from the main water line into the house. A water pressure regulator is designed to control the water pressure in individual houses. A water pressure regulator is a small, but useful, device that keeps the psi, of the water entering down to a safe level.  A water pressure regulator is a plumbing safety device that prevents water pressure from climbing too high.

This water pressure regulator is attached to the main water pipe, not very far from the main water turn on the valve. It is important to make sure that your water pressure regulator is working properly because of the numerous negative effects associated with a faulty system. Having a good water pressure regulator is one big step in the right direction when trying to prevent your water pipes and appliances from wearing out over time.

If you notice water hammering of any type, more water pressure, less water pressure, or other inconsistencies in the water pressure it may be an indicator that the water pressure regulator is not working properly.

Water Pressure Regulator

What is a pressure regulator? A water pressure regulator is a plumbing valve that reduces the water pressure coming from the main water line into the house. This valve brings down the pressure to a safe level before the water reaches any plumbing fixtures inside the home. Too much water pressure will cause many plumbing problems for the average homeowner so it is very important to keep the water pressure under control.

Where is it located? A water pressure regulator, if you have one, is usually located where the main water line comes into the house and after the main shut off valve. This way if you need to work on or change the water pressure regulator you can simply shut off the water main to do so.

An adjustable spring loaded diaphragm inside a water pressure regulator reduces the pressure of the water in the line within the valve body. Water coming into the valve is constricted and then released at a reduced pressure. See more here.

The water pressure regulator is the hub of a conservation program; but you should also consider other flow control devices such as low-flush toilets, improved water heating equipment, and better-disciplined usage habits.

How Does a Pressure Regulator Work?

A pressure regulator limits excess inlet water pressure to a constant outlet pressure. You need constant outlet pressure to ensure that your sprinkler (or emitter) performs well.

Water travels through the inlet end of the regulator and around a fixed seat into the critical flow area. The water then enters into a hollow cylinder called a throttling stem (or T-stem) which is attached to a larger diaphragm near the outlet end. A spring around the throttling stem tends to hold the flow area open, while water pressure acting on the total diaphragm area tries to close it. This duel always ends in a draw with the outlet (or regulated) pressure being determined by the spring’s compressive strength.

Your sprinklers can only pass along what they receive. Give them consistency and they’ll return the favor. Most sprinklers perform best at a specific pressure level, often lower than your in-line pressure. But in-line pressure should be at least 5 psi (0.34 bar) higher than your regulator’s designed outlet pressure. Read full article here.

You might try adjusting the water pressure regulator to see if that will help but many time it will not and the water pressure regulator will need to be replaced.

How to Adjust a Water Pressure Regulator

If you notice a problem with the water pressure in your home, it could mean that you have to make a few adjustments to the water pressure regulator. Most homes do not have a pressure regulator installed, but if you have one and it is not adjusted properly, you could easily have either too much or too little pressure in your faucet or shower.

Step 1 – Locate the Supply Line-  The first step is to locate the supply line that provides water to your house. This will allow you to then find the water meter that is generally installed in the basement near the supply line. If you live in an apartment or a house on a crawl space in colder climates, the meter is usually not in the crawl space as it could freeze; it may be under the kitchen sink or in a utility room.

Step 2 – Find the Valve-  Once you have found the water meter, locate the valve. The valve is made of brass and has a bell-shaped midsection with a medium-sized screw at the tip. Make sure that your supply line has sufficient pressure before adjusting the pressure valve itself

Step 3 – Adjust the Screw-  Now that you have located the valve and the screw, you need to loosen the locknut all the way with the wrench or pliers. The screw is your adjuster and it can be maneuvered only by loosening the locknut. Read full article here.

What Does A Water Pressure Regulator Do?

A water pressure regulator will even out the water pressure, as well as reduce strain on plumbing fixtures and increase their service life. A water pressure regulator will keep the water at a constant pressure, thus eliminating the temperature fluctuation. The use of the accumulator tank will also prolong the life of the water pumps pressure switch and the water pressure regulator will make the water injection very consistent. Once water flow is restricted, the water pressure regulator will attempt to send the proper amount of pressure through the water pipes running into the home.

Therefore, if you suspect that your water pressure regulator is not working properly, it is best to have an experienced plumber check its effectiveness for you in order to avoid costly repairs down the line. Getting a plumber out to install your new water pressure regulator is probably the best idea. Our Murrieta Plumbing Service is willing to help you to get the job done quickly and safely. Just reach us here: (951) 319-2353. 

Related Articles:

Water Pressure Problems in Murrieta

Solving Low Water Pressure In Your Home

The post A Water Pressure Regulator In Your Home appeared first on Murrieta Plumber | Murrieta Plumbing Services Residential Commercial.