Water Leak Detection Services

Water Leak Detection Services In Murrieta Homes

Water leak detection services are significantly important for a number of reasons. One of the first benefits of water leak detection services is that it can either confirm or eliminate whether a home has any leakage. Water leaks can be very damaging for Murrieta homes as they can weaken and damage the structure and foundations of your homes becoming a security hazard if immediate water leak detection services are not put into action.

Water leak detection services can either be done by periodically checking the areas and components of the house’s plumbing system or by installing a commercially available water leak detection device.

Best of all, these advanced techniques in sewer and water leak detection are non-invasive, meaning there’s no need to tear apart walls or rip up yards to locate the source of the leak.

A Beginner’s Guide to Water Leak Detection

We’ve talked about catching water leaks before, but mainly the ones that are easy to find – spikes.  There’s another type that most people don’t really talk or think about that are much more difficult to catch.  But armed with a little bit of knowledge about typical water use in residential buildings, you’ll be hunting down this type of leak in no time.

Spikes vs Continuous Leaks

With a spike you’ll see a drastic increase in your water usage, which is a sure sign that either your utility company billed you incorrectly or that all is not well in your building.  You can read more about that in our previous blog post on the topic.

A continuous water leak is less obvious and takes a little more work to detect.  Sometimes it’s been going on for years or since the building was built.  If you’ve been monitoring your water usage, then you likely just consider this the baseline usage for your building.  However, when you start to really get into the numbers that’s when a leak like this will reveal itself. Read more here.

The best part of water leak detection services is the option of an active service to both alert the homeowner and turn off the water supply to that location.

Water Leak Detection Tips

Did you know that your water meter can help you determine if you have a leak in your home?

Follow this easy 6 step process to see if you have a water leak in your home.

1. Make sure all of your water-consuming appliances are turned off and closed tightly.  This includes ice-makers in refrigerators as well.
2. Communicate with those that are inside the home to not use any water for roughly a half hour.
3. Once your faucets and appliances have been shut off, locate your water meter in your home.
4. Check the needle’s position on the dial and note the time.
5. Wait roughly 15-30 minutes.
6. Return back to your water meter and check the needle’s position.  If it has changed, you may have a water leak somewhere in your home. Read more here.

Infrared Camera are the advance tool to use in locating the leaks, relying upon it for the training of any thermographers it calls upon to help solve building issues, such as locating the trouble spots in leaking roofs, determining why a building or home is uncomfortably cold or hot (often due to poor insulation), and even to spotting the cause of slab leaks and moisture within basements.

How Plumbers Perform Leak Detection Services

Too often, plumbing leaks can go unnoticed and cause severe damage to your property before you even realize there’s a problem. Usually the first sign of an issue is higher water bills, and by then the leak may have done far more damage than you will likely be able to handle on your own. You need a professional plumber to perform leak detection services and determine the source of the leak, not only to repair it but to prevent the leak from occurring again. But how exactly do plumbers perform leak detection?

Video Camera Inspection

Your plumber can drop a fiber-optic cable down your pipeline in order to identify the source of a leak. Though the process may seem complex, this is a very efficient method of leak detection, as it gives the plumber a clear picture of what’s happening with your plumbing.

Smoke Detection

This is another method plumbers use to detect leaks. They are able to send harmless smoke down your pipeline in order to see where it goes. If it escapes through any cracks, a leak can be clearly detected. See more here.

Need a Water Leak Detection Service?

A drastic change in your water bills, damp or moldy spots in your home, low water pressure, and noticeable dripping or running water sounds are all common signs of a water leak somewhere in your plumbing system. A leaky pipe is among the most common reasons why homeowners contact our plumbing company for assistance. Some leaks are obvious, such as large leaks that result in water gushing across a floor or down a wall in the home.

If you’re experiencing any of the signs of a water leak in your home—like higher water bills or sounds of dripping water—don’t hesitate to call your local plumber. With 30 years of service, our plumbers will help find the source of the leak and restore your plumbing to normal working condition! Learn more about our water leak detection services by calling us today (951) 319-2353.

Related Article:

Locate A Leak Using A Leak Detection Equipment

The post Water Leak Detection Services appeared first on Murrieta Plumber | Murrieta Plumbing Services Residential Commercial.